Server & Computer Room Cooling — Precision That Holds Spec
A server room at 90°F is a server room about to thermal-throttle, drop nodes, or — at worst — burn down a $50K rack. Computer room cooling has to be precise, redundant, and serviced like the business depends on it.
Why Standard AC Doesn't Cut It
Standard residential and light-commercial AC is sized for human comfort — variable load, latitude on humidity, occasional cooling. Server rooms run continuous high sensible load, narrow temperature tolerance, and humidity that has to stay in a tighter band than people care about. The equipment has to match.
- Continuous duty operation — 24/7 load, no shoulder season recovery time
- High sensible heat ratio — almost all the load is heat from electronics, not latent (humidity)
- Tight temperature tolerance — typically 68–77°F intake range per ASHRAE
- Humidity management — too dry causes static, too humid causes condensation
- Redundancy — single AC failure shouldn't shut down operations
Systems We Service and Install
- CRAC and CRAH units — purpose-built precision cooling for data center environments
- Ducted and ductless server room AC — for IT closets, MDFs, and small server rooms
- Mini-split heat pumps used as server cooling — common in small/medium business setups
- In-row and rack-level cooling — high-density rack environments
- Redundant N+1 configurations — design and install for failover
- Environmental monitoring integration — temperature alarms tied to facility management
Service, Maintenance & Emergencies
Server room AC service is almost always at least quarterly maintenance — the cost of unplanned downtime is enormous and most failures are preventable. Filters, refrigerant, condensate management, and condenser maintenance catch the things that turn into 2am emergencies. When the worst happens, our 24/7 emergency line is staffed and our trucks carry parts for the most common failures.
Albuquerque Tech, Defense & Lab Sector
The Albuquerque metro has a serious concentration of defense contractors, national labs, tech companies, and specialty manufacturing — most of which run server rooms, lab data acquisition, or controlled IT environments that need precision cooling. We work with them.
Other HVAC/R Services You May Need
BakerHouse handles the full range — from a single repair call to full system installs and emergency response.
Computer Room Cooling Across New Mexico
BakerHouse handles computer room cooling across the Albuquerque metro and surrounding communities. Visit any service-area page for local notes and response info.
Server room hot? Call now.
24/7 precision cooling service across New Mexico — quarterly maintenance and emergency response.
Common Questions, Straight Answers
Do I need a CRAC unit, or can I just use a regular AC?
Depends on the load. Small IT closets with a few servers can work with a properly sized mini-split. Mid-sized server rooms benefit from purpose-built precision cooling. Large rack densities need CRAC. We'll size the right solution for your actual load.
What temperature should my server room be at?
ASHRAE recommends 64.4–80.6°F intake air for most modern servers, with 68–77°F as the comfort zone for equipment longevity. Most server rooms target around 72°F. We can help you find the right setpoint for your equipment.
Should I have backup cooling?
For business-critical server rooms, yes — N+1 redundancy means if one cooling unit fails, the others can carry the load. We design and install redundant configurations and the monitoring to verify they'll actually work when needed.
How often should server room AC be serviced?
Quarterly is the right cadence for most operations. The cost of an unplanned cooling failure and the resulting downtime dwarfs the maintenance cost. Service contracts make it automatic.
Can you connect my server room AC to our monitoring system?
Yes. We integrate environmental monitoring with most facility management and IT monitoring platforms — temperature, humidity, refrigerant pressure, alarm states.